2010 BLUE DIAMOND 72” BRUSH CUTTER EXTREME DUTY  $5,997.00

Extreme Duty, (4) Double Edged Blades, Cuts Up To 5" Trees, Wire Protection Kit Under Deck, Rugged Deck With Heavy Reinforcements, Visible Sight Glass To Check Oil Levels, Requires Only 16 GPM, 1,526 Pounds. Stk# 3187C

BLUE DIAMOND 72” HYDRAULIC BROOM EXTREME DUTY  $4,284.00

Extreme Duty Rotary Broom Hydraulic Angle Only, 26" Bristles, Stands Protect Bristles When Not In Use, 850 Pounds. Stk# 3185C

BLUE DIAMOND 72” GRAPPLE ROOT EXTREME DUTY

$2,789.00

Grapple Root Only, Covered Cylinders & Hoses, 1/2" Steel Construction, 8" Tine Spacing, Grease Fittings On All Pivot Points, Guesseted Tips, Opens From 39" & 41" Deep, Robotically Welded. Stk# 3190C

2009 TEREX TH842C TURBO LIFT

$26,500.00

2612 Hours, JD 4045TF 99HP @ 25,000 4-Cylinder Diesel, 3 Speed Power Shift Transmission, 8,000 Lb Max Lift, Three Steering Modes. Stk# 3278C

GENIE GS-3246 SCISSOR LIFT

38' Working Height, Up To 700 Lb Lift Capacity, 89 X 45.3" Steel Platform, 36" Extension Deck, Folding Rails With Full Height Swing Gate, Dual Front Wheel Drive, Proportional Lift & Drive, Platform Control With battery Chard Indicator & Diagnostic System Onboard, AC Power To Platform, Manual Lowering Valve, Emergency Stop At Both Platforms & Ground Controls, Rear Wheel Multiple Disc Brakes, Front Wheel Hydraulic Dynamic Braking, Brake Release, Solid Non Marking Tires. Stk# 3199C

PRO 65 III, Deutz 3 Cylinder Turbo Engine. Stk# 3328C

TARGET CONCRETE SAW

$12,500.00

D1005 Engine, 1404 Hours. Stk# 3329C

VIBROMAX ROLLER

$6,500.00

Stk# 3330C

Pictures Coming Soon

UPRIGHT SL20 MANLIFT

NEW 3000 GALLON BARE WATER TANK

$14,500.00

New Pull Behind Water Tank. We Can Rig This Tank To Fit Your Companies Needs. Stk# 1151

Stump Bucket Only, 56" Length, 12" Width At Tip, 3 Replaceable Cast Teeth, Curved Bottom, 1" x 8" Cutting Edge, Heavily Gusseted Quick Attach, Reverse Curled Teeth On Both Sides, Narrow Profile Digs, 388 Pounds. Stk# 3186C

BLUE DIAMOND STUMP BUCKET EXTREME DUTY

$944.00

GENIE GS-3268RT SCISSOR LIFT

$25,000.00

640 Hours, 38' Working Height, Up To 1,000 Lb Lift Capacity, 99 X 61" Steel Frame, 60" Extension Deck, Folding Rails, Proportional Lift & Drive, AC Power Platform, Full Height Swing Gate, 4 Wheel Drive, Positive Traction Control, Four Wheel Braking, Swing-Out Engine Tray, Foam-Filled Rough Terrain Tires, Tilt Level Sensor With Audible Alarm, Horn, Hour Meter, (4) Max Platform Occupancy, Vin# GS6808-50686. Stk# 3208C

2007 GENIE GTH-1056

$75,500.00

10K Lb Max Lift Capacity, 56' 10" Max Lift Height, 42' Max Reach, Full Time Planetary 4-Wheel Drive, Frame Leveling 10 Degrees Side To Side, 3 Speed Forward & Reverse Power Shift Transmission, Power Assisted Steering, Front Axle Differential Locke, Rear Axle Stabilization System, Twin Axle Mounted Stabilizers, Single, Multi-function Proportional Joystick, Machine Level Indicator, Boom Angle Indicator, Back Up Alarms, Perkins 123HP Turbo Charged Diesel Engine, Electric Block Heater For Perkins. Stk# 3198C

2009 JOHN DEERE POWERTECH 5045D TRACTOR $16,500.00

John Deere Power Tech 3029 Turbocharged 45HP@2300RPM, 2-Wheel Drive, 8 Forward/ 4 Reverse Transmission, 7.5/16 Front/ 13.6/ 28 Rear, 211.2 Hours, Power Take Off, Hydraulics, Roll Over Protection, Shown With Optional Shredder & Bucket. Bucket: John Deere 512 General Purpose Bucket. Ag Meier Brave Shredder: 15 Cutting Height, 60" Cutting Width, 1/2" X 3/1/2" Blades, 45 Horse Power Gearbox, 3 PT Hitch, 540 Tractor PTO RPM, 25 HP Minimum Required, 1-5/8" Shaft. Stk# 3221C

1997 CATERPILLAR TH83 TELESCOPIC HANDLER

$42,500.00

Caterpillar 3054T Engine, 105 HP, 4 Forward/3 Reverse Transmission, 4050 Hours, 269 Max torque, 3:94" Bore, 5" Stroke, 243in3 Displacement, 8' 17" Height, 8' Width, 9.75' WB, 19.17" Length To Fork Face, 19" Ground Clearance, 12.6' Turning Radius Over Tires, 16.63' Turning Radius Over Forks, 8K Load Capacity, 41' Max Lift Height, 7K Load At Max Height With No Stabilizers, 8K Load At Max Height With Stabilizers Down, 5998.77 Load At Max Height With Stabilizers Up, 27' Max Forward Reach, 1800 Load At Max Reach With No Stabilizers, 3890 Load At Max Reach With Stabilizers Down, 1247.81 Load At Max Reach With Stabilizers Up, 20 MPH Top Travel Speed. Hydraulic System: 3625 PSI Max System Pressure, 28 Gallons Per Minute Max Flow Pump, 455 PSI Pump Standby Pressure, 2535 PSI Steering Relief Pressure, 18.8 Gallons Per Minute Auxiliary Hydraulic Supply, 1800 PSI Auxiliary Hydraulic Supply, Axial Piston Pump. Service Refill Capacity: 31 Gallon Fuel Tank, 36 Gallon Hydraulic Tank. Transmission Speeds: 4 MPH In Forward & Reverse One, 7 MPH In Forward & Reverse Two, 14 MPH In Forward & Reverse Three, 20 MPH In Forward Four. Boom Performance: 140 Degree Coupler Fore/Aft Tilt. Brakes: Power Assisted/Foot Operated Foot Brake, Hand Operated/Modulating Parking Brake. Stk# 3444

2011 FERRARI CRANE F732 A5

8'5" Minimum Reach At 23,150 Lbs. 46'3" Max Reach At 3,680 Lbs. 206100 Lifting Moment.  46'3" Horizontal Extension. 400 Slewing Angle. 9790 Weight. 4420 PSI Pressure. 99x93x47 Dimensions. Steel With High Yield Strength, Fully Sandblasted Structure, Hexagonal Booms, Hydraulic Outreach Until 21.05M, Flanged Safety Valves, Regenerating Valve On Hydraulic Extensions, Bilateral Controls With No Remote Control, Load Limiting Device, Remote Control, Proportional Control Valve Danfoss PVG 32, ECM Electronic Crane Manager Plus Power Boost, Filter In Pressure, Stabilizers With Hydraulic Extension, Self-Tapping Bushings, SAE JIC Fittings, Turning Hook, Mounting Kit Included, Red Power. Stk# 3224

DUTEC OILFIELD BED WITH TULSA WINCH

11' X 8' Oilfield Bed With Poles, Tulsa RN15WM 15K Lb Winch, Snatch Blocks, Tail Chain, Toolbox. Stk# 3426

Stk# 3219C

Pictures Coming Soon

CAT 420D BACKHOE

© Copyright by Circle D Truck Sales, Inc. 2012. All rights reserved. Reproduction of any material appearing on this web site is strictly prohibited, including but not limited to pictures and descriptions. DISCLAIMER: Please note that all information, photos, and prices are subject to change or correction without notice. Units listed for sale may already be sold or otherwise unavailable, information on units listed is believed to be accurate, miles shown are per odometer and Ecm if available but errors can and do occur.

Cuts Up To 12" Trees, 5"x12" Cylinder, 29 Tongs Of Cutting Force At 2500 PSI, Cutting Head Rotates 90 Degrees, 1" Thick T1 Steel Cutting Edge And Construction. Stk# 3188

Pictures Coming Soon

BLUE DIAMOND TREE SHEAR

$5,612.00

Tills 6" Deep With Heavy Duty Bidirectional Rototiller, Universal Mount, 1/2" Skid Plates, Protected Motor. Tilling Widths Of 52", 68" And 76". Works In Forward And Reverse; The Offset Design Allows You To Leave No Wheel Tracks When In Reverse. Double Edge Replaceable Tines, Does Not Require High Flow.

Stk# 3189

Pictures Coming Soon

BLUE DIAMOND ROTOTILLER

$5,115.00