Cummins 8.3 250HP@2200RPM, 50K GVW, Fuller RT660 Fuller Transmission, Hendrickson Walking Beam Suspension, Conventional Cab, Single Frame, Tandem Axle, 80 Gallon Steel Fuel Tank, 2006 Presvac DOT 412 Unit, Fruitland RCF500 Vacuum Pump, 22/5 Erie Wheels, 11R22.5 Tires, Horizontal Exhaust, A/C, PWS.

 Stk# 3303

New 2011 Tiger 6300 US Gallon 150 Barrel -Non Hazardous Wastes, 3/8" 5454 2b Mill Finish Aluminum Head Material, 1/4" 5454 2b Mill Finish Shell Material, 62" OD Tank Diameter, 41' Length, External Aluminum Reinforcing Rings, Sub-Frame to Consist of Frame Sill and Bolsters, 14 PSI Internal Design Pressure, 15 PSI External Full Pressure Design Pressure, 21 PSI Hydrostatic Test Pressure, 14.6 PSI Maximum Allowable Working Pressure, Two Pressure Relief Valves at 14 PSI, 10 Gallon with Float Ball SS With Neoprene Seat, 2" Liquid Fill Combination Gauge, (1) Sight Tube (2" Diameter) installed, Complete with Tube and Connections, (3) Half Baffles Upper Section of Tank Welded to Reinforcing Pads (Aluminum), Three 20" Manways with Neoprene Alum Gaskets, Full Length Walkway with OSHA style vertical Handrail Enclosures and Alum Ladder, (1) 20" Diameter Manway with Neoprene Gasket Alum, Two 25' Lone, One Each Side, One 18x18x36 Steel Toolbox, 2-4" Inlet and discharge ports to be mounted side by side out of sump, Vapor Proof all wiring in conduit-"Truck Lites", Two Halogen Rear Work Lights Installed, Watson-Chalin Air Ride, 22,500 Lbs with ABS System, 11:00 X 24.5 Radials Dunlop, Budd Wheels (8) 11:00 x 24.5 Steel Hub Pilot Wheels,

***Optional Sandblast and Internally Coat with HyBuild Epoxy Not Included in Base Price.

Let us Customize a Truck and Trailer Combination for You!!!!

Just In!!!

2011 Dry Bulk Pneumatic Transport Trailer, 1000 CU Ft, 3 Hoppers 5454 Aluminum, Air Ride Suspension, Galvanized Steel Sch 80 Lower Section, (1) 8" X 21' Ft Curb Side, 11R22.5 Tires, Front Aluminum Fenders, + 12% F.E.T.

 

Stk# 1000CU

 Let us customize you a Kill Truck.

2006 Mack CV713 Granite, 105,500 on miles per odo/ecm, AMI 370 HP, Engine Brake, T 310M 10 speed, 18,000 front axle and 44,000 rear axle, 288" WB, Camelback spring suspension, 10 aluminum wheels, Front flotation tires, New aluminum wheels on front, 100% rubber, aluminum fuel tanks, Aluminum air tanks, all Aluminum high polished, Chrome bumper, Visor, Chrome Exhaust, Full Gauges, Tilt, Cruise, AC, PS, AM/FM stereo, New Black Paint, "NEW" Triplex Low Pressure Pump : TEE Triplex Pump, 4” Plungers, 5” Stroke, Hardened Steel Valves With Block Steel Fluid End For Well Service, Oilbath Chaincase, Ratchet Plunger Oiler, Internal Pressure Lubrication System, Charge Pump: 4” x 3” 1780 Series Centrifugal Pump, Mechanical Drive  Load Pump: 4” Roper Pump, Mechanical Drive. Low Pressure Manifold Consists Of: 4” Sch 40 SA-106 Seamless Pipe and Fittings, 4” Butterfly Valves, Camlocks with Plugs and Chains, Manifold Consists Of:  2” Sch 160 Discharge Pipe with Chiksan and 1002 Union, 2” Oteco 5,000 Lb. Pressure Relief Valve, 1” Edwards Throttle Valve, 5000 Lb. Pressure Gauge, 2” Flow Meter. Cab Mounted Controls, Triplex Pump Shifter, Centrifugal Pump Shifter, Roper Pump Shifter, Flow Meter, Sandblasted And Painted Black. "NEW" 70bbl. Vacuum Tank, 2,940 Gallons, 1/4" Head & Shell Thickness, Primary & Secondary Shutoff, (2) Top Man Ways, (1) Rear Clean Out, (2) Internal Baffles, Sump With (2) 4" Rear Outlets With Wafer Style Butterfly Valves, Front Sight Glass, Vacuum & Pressure Relief Valves, Full Length Hose Trays, Rear Bumper, Jurop R260 Vacuum / Pressure Pump, Sandblasted and painted one color.  This unit is sold. Let us customize a Kill Truck for you.

 Stk# 2290

Let us customize a unit for you. 2004 Mack CX613, 410HP, Odo shows 107,651 miles, 10 speed fuller, Jakes, 46,000lb RA, Double frame, 244" WB, 176" CT, 4:10 ratio, 24.5 tires, Aluminum wheels, 70gl. Aluminum fuel tank, Visor, Chrome Exhaust, Dual high back seats, Dual air ride seats, Power windows, Power locks, Cruise, Tilt, AC, PS, AM/FM stereo, All new paint. New Triplex Low Pressure Pump : TEE Triplex Pump, 4” Plungers, 5” Stroke, Hardened Steel Valves With Block Steel Fluid End For Well Service, Oilbath Chaincase, Ratchet Plunger Oiler, Internal Pressure Lubrication System, Charge Pump: 4” x 3” 1780 Series Centrifugal Pump, Mechanical Drive. Load Pump: 4” Roper Pump, Mechanical Drive. Low Pressure Manifold Consists Of: 4” Sch 40 SA-106 Seamless Pipe and Fittings, 4” Butterfly Valves, Camlocks with Plugs and Chains, Manifold Consists Of:  2” Sch 160 Discharge Pipe with Chiksan and 1002 Union, 2” Oteco 5,000 Lb. Pressure Relief Valve, 1” Edwards Throttle Valve, 5000 Lb. Pressure Gauge, 2” Flow Meter. Cab Mounted Control Panel Consists Of: Triplex Pump Shifter, Centrifugal Pump Shifter, Roper Pump Shifter, Flow Meter, Work Light Switches. Miscellaneous:  One Locking Tool Box, Sandblasted And Painted White. "NEW" 70bbl. Kill Tank, 2,940 Gallons, 1/4" Head & Shell Thickness, Primary & Secondary Shutoff, (2) Top Man Ways, (1) Rear Clean Out, (2) Internal Baffles, Sump With 4" Rear Outlet With Wafer Style Butterfly Valve,  Pressure Relief Valves, Full Length Hose Trays,  Hose brackets, heavy duty rear bumper with tool boxes and a pintle hitch w/air and electric plug. READY TO WORK!!! + FET of $4,501.00. This unit is sold. However Let us customize a unit for you. Stk# 2513